Search results

  1. STIMULA8

    GD Betsy 04 WRX swapped STi

    It's just a base model, but 2016 comes standard with new flatscreen head unit and rear back up camera! It's also WRB! I'm excited I haven't even seen the car yet! Monday I will be getting the vin so I can get insurance set up, then by Friday I should be driving home in my new 2016 wrx...
  2. STIMULA8

    GD Betsy 04 WRX swapped STi

    Car is now sold! Ordered a 2016 Wrx from japan and will be here this week! [emoji593][emoji851] Sent from my iPhone using Tapatalk
  3. STIMULA8

    NY | 04 WRX WRB | Full STI swap | JDM 6speed | $10,000 Firm

    Car is sold! [emoji593][emoji851] Sent from my iPhone using Tapatalk
  4. STIMULA8

    Fuel pressure drop questions

    Hmm good thoughts holy, I'm getting a significant drop when blipping, it does not rise above 40psi, and now that I took it for a drive at idle it sits at 36-38psi Sent from my iPhone using Tapatalk
  5. STIMULA8

    Fuel pressure drop questions

    Hey all, I hopefully have a quick problem to address. So I have a heavily modified wrx with an Sti swap. 2011sti shortblock, v7 Sti heads (aka 2.0) bc280 cam, Manley Pistons, gates timing kit, amrt60, tial 38mm ewg, grimmspeed up pipe, grimmspeed cross pipe, Mooreperformance DP catless, hks hi...
  6. STIMULA8

    NY | 04 WRX WRB | Full STI swap | JDM 6speed | $10,000 Firm

    Well where do I begin? I bought this car in 2012 and have had a lot of work done since then. I have everything documented in a folder. If you want to come see her just call or text me leaving a brief message. 2.5l 11' STI short block with Manley drop in pistons 2.0l V7 STI heads, the V7 STI is...
  7. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    So just for the hell of it, I checked with the AP the CEL section...and I have the TGV low circuit codes 2 of them, I have TGV deletes, I bet they aren't turned off in my tune when I disconnected the battery! Would this cause me to go in limp mode? Because a while back I had my tuner flash me a...
  8. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    this is the coupler that is damaged. What can I find to replace this one? APS doesn't make parts anymore, and their not in the US. I'm upset because that was the only leak in the system. I could hear air going through the turbo but none escaped.? While pressure testing if there was a leak in...
  9. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    11$ at Home Depot Male compressor fitting 3" coupler end The end cap to match Threaded it very tight with a bunch of Teflon tape. Drilled a 1/2" hole and threaded the compressor fitting very tight. No leaks I like it because it's very cheap and I and use it instantly and not wait for...
  10. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    I took the time to make a pressure tester. I found a boost leak in the silicone coupling that the fmic connects to the compressor housing. I have an APS fmic. They don't seek replacement parts anywhere. I need the coupling it's two elbows making an "s" shape. It has a pretty significant hole and...
  11. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Thanks for such a good response George! I feel so much dumber now! Lmao, I understand though. It was around pretty close to 60 degrees outside! There has to be something going on. I probably should I update the first post but i just upgraded the grounds from battery to fender wall, intake...
  12. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Sent you an email buddy [emoji106]? Lmk whenever you get the time! Sent from my iPhone using Tapatalk
  13. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Thanks so much man! I will try to log the next possible moment I drive the car. I'm not sure which bit ECU. I don't have the whole skill of reading logs wrapped around my head yet. So glaringly obvious is different to me haha. Well I am gunna be doing a lot more research as to how to read logs...
  14. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Okay cool thank you for the info. I did have IDC as well Sent from my iPhone using Tapatalk
  15. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Line 10975 is the other pull you can really tell. Those both jumped on me but I don't see anything. Here's the link: ps://docs.google.com/spreadsheets/d/1y1ZHpAbqULTJ87qD7Ga1JWx3sBSEswDOwiFLdvPzOEM/edit?usp=sharing Sent from my iPhone using Tapatalk
  16. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    George what's your email? I'm posting the share link. From the looks of it looks like my fuel pump is taking a shit on me. I also added fuel pump duty [emoji106]? Line 8827, tps is 100, and fuel pump maxed out at 100 through the pull and that's when I had the WOT hesitation. When I baby the car...
  17. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    Ok cool just did a log, looking at it now. It's about 48degrees out right now[emoji36] I was able to replicate the jumping/hesitation but I don't see it in the log anywhere. I let it warm up from a cold start, then didn't notice I wasn't logging so car was warming up started logging again, sat...
  18. STIMULA8

    3 port ebcs not sure what brand? Boosting issue?

    HolyCrapItsFast what is TD integral and TD proportional on the accessport? Mine has TD boost error, TD burst, and TD Continuous Sent from my iPhone using Tapatalk
  19. STIMULA8

    GD Betsy 04 WRX swapped STi

    Lol okay whatever you say I have trust in these and their solid. You can trust me more than Amazon [emoji120]? I'm a real person lol. [emoji106]? I never heard of plastic ramps till I bought them and used them myself I gained a lot of trust in my equipment. Always choke the rear tires too! I'm...
  20. STIMULA8

    GD Betsy 04 WRX swapped STi

    Never at all! The only way they will crack is if the car falls on them. My mom wanted me to do an oil change on her Impala. I had the ramps out and was going back to the garage to get more tools. She decided to try to drive right on them and went way to far and just drove over them like some...
Top