Search results

  1. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    WOT was blowing black smoke (rich) and he said it was just dumping fuel at the line one run and he stalled, and his runs were really inconsistent, when I raced him he went 14.75@99.76 and I went 13.89@98. Oh yea he also said he most likely needed a tune :)
  2. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Quarter Mile results are in!!! Current Mods: K&N drop-in replaced really dirty OEM filter Weight Reduction - 3/4 tank of 93 :lol: Current Anti-Mod: 2nd time launching the car 1st time down the 1/4 mile! Best Run: 60' = 1.8769 8th = 8.6460@79.53 4th = 13.6556@98.04 Best Trap: 13.6982@100.11...
  3. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Some updates: Purchased the following: 6spd KB Short shifter(USED) + front stay bushings(USED) + rear stay bushings (NEW) for $100 shipped AMR Big MAF Cold Air Intake USED 5k miles = $75 shipped Will be hittin up Fayetteville Motorsports Park tomorrow, gettin there about noon for Test and...
  4. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    You goin out this sunday? I wouldn't mind running a full quarter and fayetteville is only about an hour away. Also you can give me some pointers :), plus I wanna see your build/possible ride along.
  5. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    This was at Dunn-Benson, on a thursday night test and tune, next time I'll bring a bike pump and let some air out, what day does fayetteville do test and tune?
  6. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    That's a great question Fuji, my guess is whatever they set it at the dealer when they sold me the car minus anything that mightve escape in the last 11.2k, and the TPMS light isnt on :tard:. I'm not much into drag so it was more of just a fun way to spend a night after work and actually run the...
  7. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Yea, I rubbed the clutch too much, but I went there hoping to break 2s 60' and with only one pass I did that so I was pretty pleased, but yea after some practice launching sub 1.8 shouldnt be an issue, I think i woulda got there if I had more runs. That was the first time ever launching this car...
  8. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Haven't updated in a while. Got my BOV Flange and recirc tip for the HKS!!! Track results, 1/8th mile: 9.02s@76.7mph 60' = 1.98s We only got 1 run because they were doing some super 8 shootout or something. First and only pass at a drag strip, I know the 60' Could be shaved into the 1.6s but...
  9. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Some small updates: Got a used OEM Short shifter 166 shipped BNIB HKS SSQV- 90 shipped (need flange and BP kit) BNIB Megan 3" bellmouth DP - 150 picked up headed to an 8th mile with coworkers tomorrow night ill post up my slow times!!! First time ever drag racing and ive never launched the car...
  10. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    As I delve deeper and deeper into the research, I'm making more and more decisions. Here is a short "Mod List" that I know will be needed for my power goals, if anyone has something for sale off my list let me know :tup: -DOM 1.5XTR (possible coatings, still deciding on 8cm2 vs 10cm2) -DW...
  11. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    I will most likely have Turbo Time in Cary, NC do the build but I have lots of research to do still and even more time to do it in. My initial thoughts were to run 100.5mm bore and taking 1mm off the stock walls I figured were getting into thin territory. I have no idea what this block looks...
  12. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Thanks for the kind responses!! I was looking at the DOM 2.5XT (I think this is the one they refer to as the polka pickle right?) along with 20g's, I got tons of time to decide on a turbo though as that won't be happening until the block is finished anyways. As far as overbuilding the block...
  13. D

    DierwulfBL's 2011 WRB STi - Reverse Build!

    Hey guys, finally decided to put a journal together as I have been accumulating parts for my 2011 Sedan! I have a pic of the car around here somewhere but I'm too lazy to look for it :D. My plan for this car is to keep everything under warranty and OEM until I make the jump to fully built, hence...
  14. D

    September 2011 IGOTASTi meet in NC! For everyone on the forums.

    only an hour drive for me and I have to miss because my good friend is getting married, got all excited then we just got the invite yesterday :(, maybe it won't work out for them LOL
  15. D

    Moving on up.

    If you have a decent degree and some experience I dont see why 75k+ isnt out of the question, and just for reference I will be renting a house in a month that is 4 years old, 1700sq ft on about .5 acre in the suburbs about 10-15m from my work for 1050/Month if that gives you any idea of housing...
  16. D

    Moving on up.

    well if you lived in Garner/Clayton (a little more country/less packed suburbia south of Raleigh) you would be about 45 minutes from Fayetteville. From my work on a Friday it took about 1hr 15m to Fayetteville because of some nasty traffic. From Cary(higher housing costs), it would take right...
  17. D

    Moving on up.

    Hey Holy, I live in Cary right now, if you are serious about looking to move down this way I can give you good areas to live :tup: you just gotta tune my car when i start modding :-D
  18. D

    Rice Rice Baby, need opinions/suggestions

    I think we might have a winner! Thank you Paul! See I knew posting up on here would convince me not to rice out my car and end up with a much more subtle and better looking option :). Any other plate deletes people know of post em up, this is all good stuff :tup:
  19. D

    Rice Rice Baby, need opinions/suggestions

    which companies sell block off plates, id rather go that route personally lol this was just the first thing I came across that wasn't chrome :)
  20. D

    Rice Rice Baby, need opinions/suggestions

    Hey Guys & Gals, I've been kind of bothered recently by the bulging plastic on the front bumper where most people have license plates mounted, its kinda unsightly. I live in NC so a front plate is not only not required, they only give you 1. So I've been thinking about putting some sort of...
Top