joey.lisano
New member
Hi, my name is Joey. Since I've been too busy to make a member journal over here, I though I'd at least make an introduction thread.
Copy+paste cross posting. :roll:
Mod list
Engine
Cobb APv2 with a limp map
Aquamist HFS-6 meth kit, 50/50 alky mixture by volume
Perrin cold air intake
stock turbo inlet, TMIC, TB, IM, TGVs, turbo
TOP SECRET UEL headers; ceramic coated in Swain Tech's White Lightning
IAG up pipe and dump tube for 38mm EWG; ceramic coated in Swain Tech's White Lightning
TiAL MV-S 38mm EWG, 1 bar spring, black tophat; ceramic coated in Swain Tech's White Lightning
ERZ (CNT) bellmouth, catted downpipe; ceramic coated in Swain Tech's White Lightning
SRS catback; ceramic coated in Swain Tech's White Lightning, muffler painted black
Perrin lightweight crank pulley
Unorthodox Racing lightweight power steering pulley
Unorthodox Racing lightweight alternator pulley
GrimmSpeed EBCS
KS Tech air pump delete
NGK one step colder iridium spark plugs
Forge BPV
magnetic engine oil drain plug with a thick reusable washer
DIY homemade air oil separators
GMS hood dampers
Cooling
Koyo radiator, coated in Swain Tech's BBE
GrimmSpeed 160*F thermostat (MotoRad failsafe)
Mishimoto 1.3 bar upper radiator cap
Mishimoto radiator hoses
WC Lathe Werks radiator shroud
stainless steel T-bolt clamps
Heat Shielding
Litespeed titanium heat shield
DEI Reflect-A-Gold - heat shield
ThermoTec turbo wrap kit - turbine housing
Swain Tech White Lightning ceramic coating - headers, up pipe, EWG, downpipe, and catback
ThermoTec cool-air tube heat shield - cold air intake
Fuel
DW 1000cc top feed injectors
Walbro 255 lph fuel pump
Suspension
Swift Spec-R springs on stock struts
cut OEM bump stops with Mobile1 synthetic grease
Whiteline Com C front strut mounts
Group N rear strut mounts
Paranoid Fabrications 0.5" saggy butt spacers with extended studs
SPC camber bolts
Whiteline 27mm front sway bar, set to stiff 29mm setting
Whiteline 24mm rear sway bar, set to medium 24mm setting
Whiteline front ball-link endlinks
Whiteline rear ball-link endlinks
Whiteline heavy duty 24mm rear sway bar mounts
Whiteline anti-lift kit (ALK), race stiffness
free caster mod
Litespeed polished lateral links with Group N bushings
Whiteline roll center adjustment (RCA) kit
Whiteline steering rack bushings
MSI trailing arms
Group N front & rear trailing arm bushings
alignment by Got2Boostit2
Enkei RPF1 wheels in black, 17x8 +45mm
*with Bridgestone Blizzak REVO1 225/45/17 tires
Chassis Bracing and Modification
Lightspeed rear chassis bridge
Lightspeed rear bumper beam
AMS front bumper beam
TiC Giuyngmyo fender cowl braces
Whiteline front strut bar
Whiteline rear strut bar
Whiteline KSB700 lower H brace
removed front U subframe
removed spare tire, jack, tools
removed gray bar under rear seat
Drivetrain
ACPT carbon fiber driveshaft
Beatrush engine mounts
Beatrush transmission mount
Beatrush forged pitchstop mount
TiC rear diff mount bushings, race stiffness
Whiteline gearbox / transmission crossmember bushings, race stiffness
Whiteline rear diff support lock / outrigger bushings
Whiteline rear subframe lockdown bolts
Kartboy short throw shift lever
Kartboy front shifter bushings
Kartboy rear shifter bushing
TiC linkage bushings
TiC pivot bushings
WC Lathe Werks shift knob
Cobb exhaust hanger (1)
Kartboy XL exhaust hangers (2)
zip ties for the exhaust hanger on the midpipe
Brakes
DBA 4000 series slotted rotors, front and rear (waiting for stock rotors to wear out)
Hawk HPS pads
Goodrich stainless steel lines (stock lines are stuck
)
TiC titanium brake shims
TiC titanium wheel bearing shims
Perrin master cylinder brace
Exterior
replica V limited front lip
20% tint around, 70% tint on windshield
04/05 tail light swap
Rally Armour UR mudflaps
Perrin wing stiffis (2)
Hella Super Tones car horns
DIY painted headlights
debadged trunk
de-stickered and de-emblemed grill
disabled daytime running lights
LED license plate lights
Interior
HD Motorsports GoPro camera
Innovate Motorsports LC-1 wideband with XD-16 gauge
Mach-V IC temperature gauges
Prosport premium peak/warn 52mm amber/white gauges
*boost
*exhaust gas temperature
*oil temperature
*oil pressure
*fuel pressure
*water temperature
*voltage
Prosport gauge installation accessories
ATI 3 gauge clock pod
ATI 2 gauge steering column pod
GlowShift 4 gauge A pillar pod
Panasonic CQ-9800U headunit
black STI floor mats
Autospeed dead pedal
LED map lights
disabled seat belt alarm
Fluids
engine: Shell Rotella T6 synthetic 5w40
transmission: Motul gear300 75w90 synthetic
read diff: Motul gear300 75w90 synthetic
brakes: Motul RBF600
coolant: Subaru coolant
Other
Actron compression tester
Perrin foam filter cleaner
RainX lattitude windshield wipers
Etymotic Research earplugs for highway cruising
5 year contract with IWSTI - big PM inbox
Old parts
Torque Solution V3 pitch mount - switched to Beatrush since it's louder
Whiteline 24mm front sway bar, set to stiff 26mm setting - wanted a flatter front end when cornering
Whiteline gearbox / transmission crossmember bushings, regular stiffness - wanted race stiffness to make the gear whine even louder
GMS 170*F thermostat - kept coolant at 195*F under all conditions, not my preference
Perrin front strut bar - did not like the fitment
GrimmSpeed up pipe - dump tube did not fit with catted downpipe
Special thanks to
Geoff @ Cygnus Performance
Adam @ Litespeed Performance
Copy+paste cross posting. :roll:
Mod list
Engine
Cobb APv2 with a limp map
Aquamist HFS-6 meth kit, 50/50 alky mixture by volume
Perrin cold air intake
stock turbo inlet, TMIC, TB, IM, TGVs, turbo
TOP SECRET UEL headers; ceramic coated in Swain Tech's White Lightning
IAG up pipe and dump tube for 38mm EWG; ceramic coated in Swain Tech's White Lightning
TiAL MV-S 38mm EWG, 1 bar spring, black tophat; ceramic coated in Swain Tech's White Lightning
ERZ (CNT) bellmouth, catted downpipe; ceramic coated in Swain Tech's White Lightning
SRS catback; ceramic coated in Swain Tech's White Lightning, muffler painted black
Perrin lightweight crank pulley
Unorthodox Racing lightweight power steering pulley
Unorthodox Racing lightweight alternator pulley
GrimmSpeed EBCS
KS Tech air pump delete
NGK one step colder iridium spark plugs
Forge BPV
magnetic engine oil drain plug with a thick reusable washer
DIY homemade air oil separators
GMS hood dampers
Cooling
Koyo radiator, coated in Swain Tech's BBE
GrimmSpeed 160*F thermostat (MotoRad failsafe)
Mishimoto 1.3 bar upper radiator cap
Mishimoto radiator hoses
WC Lathe Werks radiator shroud
stainless steel T-bolt clamps
Heat Shielding
Litespeed titanium heat shield
DEI Reflect-A-Gold - heat shield
ThermoTec turbo wrap kit - turbine housing
Swain Tech White Lightning ceramic coating - headers, up pipe, EWG, downpipe, and catback
ThermoTec cool-air tube heat shield - cold air intake
Fuel
DW 1000cc top feed injectors
Walbro 255 lph fuel pump
Suspension
Swift Spec-R springs on stock struts
cut OEM bump stops with Mobile1 synthetic grease
Whiteline Com C front strut mounts
Group N rear strut mounts
Paranoid Fabrications 0.5" saggy butt spacers with extended studs
SPC camber bolts
Whiteline 27mm front sway bar, set to stiff 29mm setting
Whiteline 24mm rear sway bar, set to medium 24mm setting
Whiteline front ball-link endlinks
Whiteline rear ball-link endlinks
Whiteline heavy duty 24mm rear sway bar mounts
Whiteline anti-lift kit (ALK), race stiffness
free caster mod
Litespeed polished lateral links with Group N bushings
Whiteline roll center adjustment (RCA) kit
Whiteline steering rack bushings
MSI trailing arms
Group N front & rear trailing arm bushings
alignment by Got2Boostit2
Enkei RPF1 wheels in black, 17x8 +45mm
*with Bridgestone Blizzak REVO1 225/45/17 tires
Chassis Bracing and Modification
Lightspeed rear chassis bridge
Lightspeed rear bumper beam
AMS front bumper beam
TiC Giuyngmyo fender cowl braces
Whiteline front strut bar
Whiteline rear strut bar
Whiteline KSB700 lower H brace
removed front U subframe
removed spare tire, jack, tools
removed gray bar under rear seat
Drivetrain
ACPT carbon fiber driveshaft
Beatrush engine mounts
Beatrush transmission mount
Beatrush forged pitchstop mount
TiC rear diff mount bushings, race stiffness
Whiteline gearbox / transmission crossmember bushings, race stiffness
Whiteline rear diff support lock / outrigger bushings
Whiteline rear subframe lockdown bolts
Kartboy short throw shift lever
Kartboy front shifter bushings
Kartboy rear shifter bushing
TiC linkage bushings
TiC pivot bushings
WC Lathe Werks shift knob
Cobb exhaust hanger (1)
Kartboy XL exhaust hangers (2)
zip ties for the exhaust hanger on the midpipe
Brakes
DBA 4000 series slotted rotors, front and rear (waiting for stock rotors to wear out)
Hawk HPS pads
Goodrich stainless steel lines (stock lines are stuck
TiC titanium brake shims
TiC titanium wheel bearing shims
Perrin master cylinder brace
Exterior
replica V limited front lip
20% tint around, 70% tint on windshield
04/05 tail light swap
Rally Armour UR mudflaps
Perrin wing stiffis (2)
Hella Super Tones car horns
DIY painted headlights
debadged trunk
de-stickered and de-emblemed grill
disabled daytime running lights
LED license plate lights
Interior
HD Motorsports GoPro camera
Innovate Motorsports LC-1 wideband with XD-16 gauge
Mach-V IC temperature gauges
Prosport premium peak/warn 52mm amber/white gauges
*boost
*exhaust gas temperature
*oil temperature
*oil pressure
*fuel pressure
*water temperature
*voltage
Prosport gauge installation accessories
ATI 3 gauge clock pod
ATI 2 gauge steering column pod
GlowShift 4 gauge A pillar pod
Panasonic CQ-9800U headunit
black STI floor mats
Autospeed dead pedal
LED map lights
disabled seat belt alarm
Fluids
engine: Shell Rotella T6 synthetic 5w40
transmission: Motul gear300 75w90 synthetic
read diff: Motul gear300 75w90 synthetic
brakes: Motul RBF600
coolant: Subaru coolant
Other
Actron compression tester
Perrin foam filter cleaner
RainX lattitude windshield wipers
Etymotic Research earplugs for highway cruising
5 year contract with IWSTI - big PM inbox
Old parts
Torque Solution V3 pitch mount - switched to Beatrush since it's louder
Whiteline 24mm front sway bar, set to stiff 26mm setting - wanted a flatter front end when cornering
Whiteline gearbox / transmission crossmember bushings, regular stiffness - wanted race stiffness to make the gear whine even louder
GMS 170*F thermostat - kept coolant at 195*F under all conditions, not my preference
Perrin front strut bar - did not like the fitment
GrimmSpeed up pipe - dump tube did not fit with catted downpipe
Special thanks to
Geoff @ Cygnus Performance
Adam @ Litespeed Performance
