2007 STI build (Tanner Smith)
- Thread starter Smee_STI
- Start date
and some works 
️
Grinder34
Track Monkey
Wait, so Wilwood F/R was cheaper than Stoptech F?
Also, you can get the Stoptech's for cheaper than the price I listed on that spreadsheet, but you have to contact vendors directly, and it helps if they're vendors. I got a great deal from a vendor on here when I got mine.
Also, you can get the Stoptech's for cheaper than the price I listed on that spreadsheet, but you have to contact vendors directly, and it helps if they're vendors. I got a great deal from a vendor on here when I got mine.
Was it hard to install?Perrin master cylinder brace is in//images.tapatalk-cdn.com/15/09/18/50c336b75e82e307ccf8833ec071361e.jpg
Sent from my iPhone using Tapatalk
Ask us how to become a Lifetime Platinum Member today!
Grinder34
Track Monkey
Take that air pump out for good! It's ugly, "heavy" and takes up room. In case you're wondering, it's there to dilute exhaust gasses to pass emissions for cold start. It doesn't actually cause the car to produce fewer emissions, it just mixes them with fresh air so the concentration is less.
Had to replace my front two brembos. Get a used set locally for 500$. Also installed my StopTech SS Brake lines and Perrin master cylinder brace.
Pulled all the old fluid and flushed the system out with DOT 3 fluid. Then ran motul 660 DOT 4 through the system and the brakes feel 1000X better.
Pics are of my messed up old calipers and the brake fluid I pulled out.
Sent from my iPhone using Tapatalk
Similar threads
