2015 GBP STi Limited

[CSF707]

[MENTION=9]HolyCrapItsFast[/MENTION]
I think I found it, is it the connector under the intake hose? Can anyone confirm that's the "right TGV sensor"

As far as white wire, should I t-tap the white wire on the gauge half of the connector? (top half of the pic is gauge wires/bottom half is the bosch sensor wires)

 

[Raven32]

@HolyCrapItsFast
I think I found it, is it the connector under the intake hose? Can anyone confirm that's the "right TGV sensor"

http://i483.photobucket.com/albums/...4638557_1760223753_o_zpss4pdndqb.jpg~original

As far as white wire, should I t-tap the white wire on the gauge half of the connector? (top half of the pic is gauge wires/bottom half is the bosch sensor wires)
http://i483.photobucket.com/albums/...74443557_393506831_n_zpsjwgobqxn.jpg~original

would need [MENTION=9]HolyCrapItsFast[/MENTION] to verrify but i am assuming the white wire off the gauge that provides a 0-5v signal that the ECU can read.

 

[HolyCrapItsFast]

The TGV connector looks like the correct one but the white wire in the AFR harness is not. Do not connect the TGV to any wires in this harness, you will blow the input on the ECU.

There is a second power harness for the gauge (assuming this is AEM). You need to locate that power harness. It contains a red, black, blue and white wire. The white wire should have nothing hooked to it currently. That is the wire you want.

@HolyCrapItsFast
I think I found it, is it the connector under the intake hose? Can anyone confirm that's the "right TGV sensor"

http://i483.photobucket.com/albums/...4638557_1760223753_o_zpss4pdndqb.jpg~original

As far as white wire, should I t-tap the white wire on the gauge half of the connector? (top half of the pic is gauge wires/bottom half is the bosch sensor wires)
http://i483.photobucket.com/albums/...74443557_393506831_n_zpsjwgobqxn.jpg~original

 

[Taranto217]

Looks killer!!

 

[Raven32]

[MENTION=3232]CSF707[/MENTION]
https://forums.nasioc.com/forums/showthread.php?t=2805570

for your logging questions

 

[CSF707]

Thanks [MENTION=5388]Raven32[/MENTION] I found that article yesterday and started datalogging on that Sensor Input Monitor Only (TGV Right), there's two of them so I logged both.

Think one was RAW and the other was Volt, both displaying the same values I think. And it was very much different than the left so it's definitely reading something.

Since the wire is 0-5 volt gauge wire. It's showing just about that, kinda peaking around 4.6 though. I'm guessing the formula needs to be placed in to convert the values to the wideband numbers?

Just waiting on [MENTION=9]HolyCrapItsFast[/MENTION] to verify if these are what he needs

 

[CSF707]

Finally gaining some progress and got the AP showing the wideband numbers properly
Proper tuning in progress those 4th gear pulls are no joke lmao, knocked two of those out. Next up 3rd gear pull, but first... back to work zZz. lol

 

[Raven32]

Finally gaining some progress and got the AP showing the wideband numbers properly
Proper tuning in progress those 4th gear pulls are no joke lmao, knocked two of those out. Next up 3rd gear pull, but first... back to work zZz. lol

Nice better luck than I lol


Sent from my iPhone using Tapatalk

 

[CSF707]

Nice better luck than I lol
Sent from my iPhone using Tapatalk

Lol I wasn't using the modified map to change the wideband numbers haha, Holy got sneaky and uploaded a new one in Dec without telling me
haha my tgv was probably acting funny too oops

 

[CSF707]

It would seem I've been away far too long, gonna be adding some exterior changes soon and it would seem I need a new img host lol. Recommendations?

 

[Alin]

Probably Tapatalk... And welcome back!!

Sent from my E6810 using Tapatalk

 

[CSF707]

Found a way to get Google Photos to stick

Meanwhile here's some recent photos
Before fog bezels

Most recent

 

[CSF707]

Think I'm gonna order some more tomorrow... to be continued

 

[Alin]

Car looks so good, man!

Sent from my E6810 using Tapatalk

 

[CSF707]

Thank you Added the f1 v2 brake light, wish they kept it on the car for the US subies!

Low-intensity parking lights on, much brighter when on the brakes. Better pics to come, only video I got is on my phone.

 

[CSF707]

For randomness added winglets to see their quality, I still need to go out for better photos from a distance.
Side note @HolyCrapItsFast Tim requesting 92 oct map lols you gave him a 93 which we don't have here Whenever you get a chance, we will be installing his parts soon for datalogging

 

[CSF707]

Lip kit ordered, should arrive Thursday but might not be able to fully install it all till Sunday though when my friends are able to assist.
How does one not break their front lip :tard:especially you lowered folks lol reverse in all parking spots? That must be key haha

 

[CSF707]

Going on tomorrow :tup:

 

[CSF707]

Finally got it on

 

[IGOTASTi]

[MENTION=3232]CSF707[/MENTION] looks awesome! :tup: