TE37SL's....Oh yes they WILL fit!!

[Stiyle11sedan]

Just thought I would post this up as I am about to embark on something that not a lot of people have a whole lot of confidence in. I am going to put 18x10.5 +22 TE37SL on my car with a 255/35 tire. The way I see it is I currently have a set of 18x10.5 +30 wheels on now with a 245/40...yes it is a little stretched but not half as bad as I figured they would be. Also I am not running very much more than stock camber as I am only at -2.0 in front and -2.2 in the rear. So to put it into perspective I really only have to clear another 8mm but since I am going with a lower and wider tire I do believe this will be very manageable. Maybe a tad bit more camber but with the 255's I should have no problem with the contact patch!! Please let me know what you think!! I am always open to constructive criticism!

Here are a few crappy pics of the wheels:

 

[Stiyle11sedan]

I do have all four rolled already...but what I am trying to avoid is doing any kind of pull if it is at all possible!!

 

[Stiyle11sedan]

So after careful consideration I have decided to return the 10.5 +22's and go with the 18x10 +30. I talked with someone who had this setup on his car and it was nothing short of a nightmare. He said it rubbed everywhere he went, front and rear, and also was forced to run a -6.5 rear camber and -5.5 front camber. At these specs he was chewing through tires within three months. I want a car that is flush but functional as well and that will be good on a daily basis. I plan on running a 255/35 on these and I think there will be plenty of clearance.

I am just glad I have a good buddy that works at Vivid Racing to take care of me!!