Hey everyone,
I figured I'd start a thread seeing I have a few things done and plan on doing a lot of things to my car. So here goes...
Previous cars:
1999 Buick Century
2001 Chevy Cavalier
2004 Olds Alero
2004 Nissan Sentra (first std)
2006 Mazda 6 GT
2011 Hyundai Genesis 2.0T
Winter Beater/Daily cars while owning my STI
2003 Volvo S40
2004 Chrysler Sebring
2010 Mitsubishi Ralliart
2016 Toyota Tacoma TRD Sport (Current)
Car is making: 444awhp and 384awtq
My current mod list
Engine/Power:
CP 99.5mm/ 8.2 comp forged pistons
Invidia divorced wastegate/catless
Perrin BPV
Perrin pulley and rad cover
Tomei Turbo Inlet Pipe
Invidia Q300 Cat-Back
Tomei UEL Header (Wrapped)
Grimmspeed Uppipe with (Red) 38mm Tial Wastegate (Ceramic Coated Black)
Aquamist HFS-3 Methanol Injection Kit
Cobb SF Intake (Blue)
Grimmspeed EBCS
Grimmspeed Air Oil Separator
DW65c Fuel Pump
Forced Performance FP Green Turbo (PTP Blanket installed)
Perrin FPR with Tomei Gauge
DW 1000cc Injectors
Zerolift TGV Deletes
IAG AOS
Interior/Exterior:
HT Autos front lip, side skirts, rear lip and exhaust garnishes
OEM JDM rain guards
SMY gauge cluster
15% tint in back
Hella Supertone Horns
Anarchy Motive Shift Knob (White)
OEM Vortex Generator
Taillight Blinker Red Overlays
Lightwerkz Dual Projector with Demon Eye mod
HT Autos Fender Flares
Drivetrain/Transmission:
Kartboy Short Shifter
Kartboy front and rear shifter bushings
Whiteline Rear Diff Bushings
Competition Stage 2 Clutch
Suspension:
Air Lift Performance Struts/Bags
3P Management with (1) 380 Compressor
Whiteline Steering Rack Bushings
Brakes/wheels:
Work Wheels Lugs (Gloss Black)
Work Meister M1 (18x12 -2)
Bridgestone Potenza re760 (295-35)
Stoptech Slotted Rotors
Stoptech Street Pads
Stoptech SS Brake Lines
Motul 600 DOT4 Fluid
Here is how it sits now..
On order:
Nothing right now
Waiting to install:
VVivid Pro Line Wrap
Future Mods:
Full engine Build
New turbo setup
FMIC
Custom diffuser, front splitter and side extensions
Thanks Too My Sponsors:
I would really like to thank my sponsors that I have picked up along the way and helping me with this build! First I would like to thank Corbin Johnson at Johnson Tuning for all the tuning work gone into my car, I would also like to thanks Air Lift Performance for the sponsorship with them! Thansk to Fisik Aero for the Future exterior parts that will be going on
Thanks to [MENTION=1]IGOTASTi[/MENTION] for being a big help promoting my build and also to Anarchy Motive for making my shift knobs.
I figured I'd start a thread seeing I have a few things done and plan on doing a lot of things to my car. So here goes...
Previous cars:
1999 Buick Century
2001 Chevy Cavalier
2004 Olds Alero
2004 Nissan Sentra (first std)
2006 Mazda 6 GT
2011 Hyundai Genesis 2.0T
Winter Beater/Daily cars while owning my STI
2003 Volvo S40
2004 Chrysler Sebring
2010 Mitsubishi Ralliart
2016 Toyota Tacoma TRD Sport (Current)
Car is making: 444awhp and 384awtq
My current mod list
Engine/Power:
CP 99.5mm/ 8.2 comp forged pistons
Invidia divorced wastegate/catless
Perrin BPV
Perrin pulley and rad cover
Tomei Turbo Inlet Pipe
Invidia Q300 Cat-Back
Tomei UEL Header (Wrapped)
Grimmspeed Uppipe with (Red) 38mm Tial Wastegate (Ceramic Coated Black)
Aquamist HFS-3 Methanol Injection Kit
Cobb SF Intake (Blue)
Grimmspeed EBCS
Grimmspeed Air Oil Separator
DW65c Fuel Pump
Forced Performance FP Green Turbo (PTP Blanket installed)
Perrin FPR with Tomei Gauge
DW 1000cc Injectors
Zerolift TGV Deletes
IAG AOS
Interior/Exterior:
HT Autos front lip, side skirts, rear lip and exhaust garnishes
OEM JDM rain guards
SMY gauge cluster
15% tint in back
Hella Supertone Horns
Anarchy Motive Shift Knob (White)
OEM Vortex Generator
Taillight Blinker Red Overlays
Lightwerkz Dual Projector with Demon Eye mod
HT Autos Fender Flares
Drivetrain/Transmission:
Kartboy Short Shifter
Kartboy front and rear shifter bushings
Whiteline Rear Diff Bushings
Competition Stage 2 Clutch
Suspension:
Air Lift Performance Struts/Bags
3P Management with (1) 380 Compressor
Whiteline Steering Rack Bushings
Brakes/wheels:
Work Wheels Lugs (Gloss Black)
Work Meister M1 (18x12 -2)
Bridgestone Potenza re760 (295-35)
Stoptech Slotted Rotors
Stoptech Street Pads
Stoptech SS Brake Lines
Motul 600 DOT4 Fluid
Here is how it sits now..

On order:
Nothing right now
Waiting to install:
VVivid Pro Line Wrap
Future Mods:
Full engine Build
New turbo setup
FMIC
Custom diffuser, front splitter and side extensions
Thanks Too My Sponsors:
I would really like to thank my sponsors that I have picked up along the way and helping me with this build! First I would like to thank Corbin Johnson at Johnson Tuning for all the tuning work gone into my car, I would also like to thanks Air Lift Performance for the sponsorship with them! Thansk to Fisik Aero for the Future exterior parts that will be going on