War_Panda04
STill Plays With Toys!
Sorry @grinder i wasnt aware there was a legit difference. I will b tucking
And thats all i have to say about that...
And thats all i have to say about that...
"Chloe" 07 STi
- Thread starter War_Panda04
- Start date
War_Panda04
STill Plays With Toys!
[MENTION=1172]Alin[/MENTION]. only downstairs 
:rofl:
:rofl:
War_Panda04
STill Plays With Toys!
"Chloe" 07 STi
And thats it ladies and gentleman the motor is out!! First time pulling a subaru motor, learned a lot and didnt break anything
Now i get to work on TUCKING ( [MENTION=1172]Alin[/MENTION] [MENTION=652]Grinder34[/MENTION] ) the engine bay lol thats going to occupy my time so im not out spending money and can focus on saving up for the new motor and what not
And thats all i have to say about that...
And thats it ladies and gentleman the motor is out!! First time pulling a subaru motor, learned a lot and didnt break anything
Now i get to work on TUCKING ( [MENTION=1172]Alin[/MENTION] [MENTION=652]Grinder34[/MENTION] ) the engine bay lol thats going to occupy my time so im not out spending money and can focus on saving up for the new motor and what not
And thats all i have to say about that...
War_Panda04
STill Plays With Toys!
I think im going to try and rebuild my block as well and sell it to try nd make some money back.
And thats all i have to say about that...
And thats all i have to say about that...
War_Panda04
STill Plays With Toys!
Now the question is do i rebuild stock or throw some upgraded parts in it? Or just sell the block by itself and clean it up for someone to do their own work.
These are the questions lol
And thats all i have to say about that...
These are the questions lol
And thats all i have to say about that...
Grinder34
Track Monkey
Do some quick pricing research.
My thoughts are that people have their own preferences, so if you chose Piston A, and someone likes Piston B, you'll be taking a hit (just as an example).
But at the same time, labor and know-how aren't cheap. You can (almost) always profit from some sweat equity and make more than just the cost of parts. The question is how much is your time worth to you?
My thoughts are that people have their own preferences, so if you chose Piston A, and someone likes Piston B, you'll be taking a hit (just as an example).
But at the same time, labor and know-how aren't cheap. You can (almost) always profit from some sweat equity and make more than just the cost of parts. The question is how much is your time worth to you?
SudoSTI
Member
Unless you rebuild them on the regular it would probably be best bang for you buck to sell it as is. Like Grinder said, people have different brand and/or spec preferences/needs so by rebuilding you're only narrowing your potential market. Plus it would be tough to make money back after having to buy components and whatnot. Plus plus a lot of people will be turned off unless the rebuild was performed by a reputable builder. FYI YMMV etc
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
War_Panda04
STill Plays With Toys!
Thanks for the info guys. My plan was to have a buddy of mine do the actual work for it and split the money with him but now im thinking as is would b the best route for that simple reason of limiting my potential market. Now the question is do i split the halves and clean it up or literally as is?
And thats all i have to say about that...
And thats all i have to say about that...
War_Panda04
STill Plays With Toys!
So im switching out the corbeau seats i bought for these fixed back OMP seats i got from a co-worker FOR FREE!! he said he wanted to see them put to good use rather than sitting at his house
Girlfriend approved!!
Sent from my iPhone using Tapatalk
HolyCrapItsFast
Drinks beer!
Nice! I wanna see them in the car :tup:
War_Panda04
STill Plays With Toys!
you and me both lol. i need to figure out which mounts to get. they make "tall" and "short" mounts but id like to incorporate sliders into that so i think getting the short ones would be best. i like sitting low in the car but still high enough that i can see what i need to you know
HolyCrapItsFast
Drinks beer!
I can tell you from experience to get the short especially if you add sliders :tup:. You will not be sorry. Besides if it is to low with the short ones you can always shim them up. If you get the tall ones then you are stuck with what you have.
War_Panda04
STill Plays With Toys!
good call George! ill get those ordered and installed soon
War_Panda04
STill Plays With Toys!
Just posted the Corbeau seats for sale. Hopefully someone takes them soon.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
