Hey guys, been looking around at various wheel fitments. Both "stance" and "track" fitments. This thread is not a war of form vs. function. Posts along the lines of "stanching a rally car is stupid" etc. will be deleted. The widest I've seen is a 2010 on 18x10.5 +30 nto3-m's. Has anyone seen someone run 11's? I know Volk makes 18x11 +18. Even with fender rolling and pulling and some camber would these even fit? Ready, go!
Grinder34
Track Monkey
Grinder34
Track Monkey
Also:
http://www.floridastreetscene.net/showpost.php?p=1285871&postcount=299
IAG has it listed as future mods.
http://www.floridastreetscene.net/showpost.php?p=1285871&postcount=299
IAG has it listed as future mods.
Last edited:
Stiyle11sedan
New member
With an aggressive pull and some major camber it should work with an 11....I have a buddy that runs an 11 1/2 on a GC but really looks odd with about 1-1 1/2" barrel poke!!
I run a 18x10.5 +30 with just adjustable rca's and all four rolled...no pulling involved, and I have 245/40's on it. Not too stretched!
I run a 18x10.5 +30 with just adjustable rca's and all four rolled...no pulling involved, and I have 245/40's on it. Not too stretched!
Stiyle11sedan
New member
No they are Varrstoen 2.2.1 but they are the same size and offset that you are talking about. I have seen some NT03-M's on a GR hatch and they looked pretty good, and I think he was even stretching a 225/45 on them. I just purchased some Volk TE37SL's in 18x10.5 +22 so they ought to be fun to fit but with just a little more camber and a decent pull I am going to get them to fit....I will also be running Falken 452's in a 255/35/ so I can get a little bit lower than I am now.
